Chi tiết sản phẩm

Đầu đo độ cứng

Mã sản phẩm:  
Nhà sản xuất:  Bowers
Xuất xứ:  UK
Giá: 00 vnđ
Tình trạng:  Còn hàng

Đầu đo độ cứng chuẩn Rockwell
Phù hợp với mọi loại máy đo dộ cứng Rockwell trên thị trường như Mitutoyo, Future tech...
Giá cả phải chăng đảm bảo sử dụng tốt

With official calibration certificates UKAS, DKD or ASTM

CV Instruments offers a wide range of indenters. All certified indenters will be issued with a certificate traceable to internationally recognised standards such as UKAS, DKD or ASTM. We also offer low cost factory certified indenters and specials (see below).

Specials 
CV Instruments also offer special adapters for indenters to enlarge the field of application. Small gooseneck adapters are available in three sizes to permit regular or superficial Rockwell hardness testers to perform internal tests on rings, tubes and annular parts where the inside diameter, plus the wall thickness, is less than 50.8mm or 2 inches.

These adapters will fit any of the standard Rockwell hardness testers. The gooseneck adapter can be clamped into the bottom of the plunger rod (in the same manner as an indenter) and is not heavy enough to affect a reading due to increasing the applied load. The minimum internal diameter which can be tested is 11.5mm or 7/16 inch.

Ask for our separate product list of indenters.

Ý KIẾN BẠN ĐỌC

* Sản phẩm: Đầu đo độ cứng

Chưa có ý kiến nào cho sản phẩm này
MỜI BẠN ĐỌC ĐÓNG GÓP Ý KIẾN VỀ SẢN PHẨM NÀY !
Tiêu đề:  
Họ và tên:  
Email:    
Bình chọn:
Ý kiến:
Mã xác nhận:
 Security code
(*) Ý kiến của quý khách sẽ được chúng tôi kiểm duyệt trước khi xuất hiện trên đây !